INCH-POUND
MIL-PRF-49293B
13 September 2011
SUPERSEDING
MIL-PRF-49293A
03 July 1997
PERFORMANCE SPECIFICATION
RADIAC SET, AN/PDR-75
This performance specification is approved for use by USACECOM,
Department of the Army and is available for use by all Departments and Agencies of
the Department of Defense.
1. SCOPE.
1.1 Scope. This performance specification covers the Radiac Set, AN/PDR-75.
2. APPLICABLE DOCUMENTS.
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this
specification or recommended for additional information or as examples. While every
effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, Standards and Handbooks. The following specifications, standards
and handbooks form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the Department of
Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited
in the solicitation (See 6.2). Handbooks are for guidance only and therefore are not
mandatory.
Comments, suggestions, or questions on this document should be addressed to:
Communications-Electronics RDEC ATTN: RDER-PRQ-QE Fort Monmouth, NJ 07703-
5201or emailed to mike.g.williams@us.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the
ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5855
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business