MIL-PRF-49166-1 Mechanical Scanner, Mx-9872\(V\)1/Ua

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

MIL-PRF-49166/1B(CR)

4.5.6 Scan jitter in azimuth. See MIL-PRF-49166.

4.6 Environmental Tests. See MIL-PRF-49166.

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified

in the contract or order (see 6.2). When actual packaging of material is to be performed by DoD

personnel, these personnel need to contact the responsible packaging activity to ascertain

requisite packaging requirements. Packaging requirements are maintained by the Inventory

Control Point's packaging activity within the Military Department of Defense Agency, or within

the Military Department's system Command. Packaging data retrieval is available from the

managing Military Department's or Defense Agency's automated packaging files, CD-ROM

products, or by contacting the responsible packaging activity.

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful,

but is not mandatory.)

6.1 Intended use. The MX-9872(V)1/UA is intended for use with the AN/ASQ-170,

Target Acquisition and Designation Sight, and AN/ASQ-11, Pilot Night Vision Sensor

(TADS/PNVS).

6.2 Acquisition requirements. Acquisition documents should specify the following:

a. Title, number, and date of this specification.

b. Refer to the General specification (MIL-PRF-49166) for other acquisition requirements

data.

6.3 Definitions. (See MIL-PRF-49166)

6.4 Subject term (key word) listing.

Scan mechanism

Scan-Interlace

6.5 Changes form previous issue. Marginal notations are not used in this revision to

identify changes with respect to the previous issue due to the extent of the changes.

CUSTODIAN:

PREPARING ACTIVITY:

Army-CR

(Project 5855-0221)