MIL-PRF-49150D (CR)
2.1.1 Reference documents, drawings and publications. The
following other Government documents, drawings and publications form
a part of this document to the extent specified herein. Unless
otherwise specified, the issues are those cited in the solicitation
(see 6.2.e).
DRAWINGS
USA COMMUNICATIONS-ELECTRONICS COMMAND
SM-D-77133/SM-D-771476
- Entrance Housing Assembly (V1A
Configuration)
SM-D-77143/SM-D-771486
- Prism Objective Housing Assembly
(V2A/V3 Configuration)
5005814
- Prism Objective Housing Assembly (V4
Configuration)
(Copies of specifications, standards, drawings, and publications
required by contractors in connection with specific procurement
functions should be obtained from the procuring activity or as
directed by the contracting officer.)
2.2. Order of precedence. In the event of a conflict between
the text of this specification and the references cited herein, the
text of this specification takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Description. The entrance housing assembly is herein
referred to as the entrance assembly. The entrance assembly is the
portion of the driver's viewer outside the vehicle. It directs the
line of sight to the objective lens.
3.2 Construction. The entrance assembly shall be constructed
to assure compliance with the contract configuration baseline and in
accordance with the following drawings as applicable (see 6.2.d):
Type I
SM-D-771333/SM-D-771476 Entrance Housing
Assembly
Type II/III
SM-D-771434/SM-D-771486 Prism Objective
Housing Assembly
Type IV
5005814 Prism Objective Housing Assembly
3.3 First article testing (FAT). When specified in the contract
(see 6.2.c and 6.2.g) the contractor shall furnish unit(s) for FAT
inspection and approval (see 4.2).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business