MIL-PRF-49150D (CR)
5.
PACKAGING
5.1 Packaging. For acquisition purposes, the packaging
requirement shall be as specified in the contract or purchase order
(see 6.2.h). When actual packaging is to be performed by DoD
personnel, these personnel need to contact the responsible packaging
activity to ascertain requisite packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging
activity within the Military Department of Defense Agency, or within
the Military Department's System Command. Packaging data retrieval is
available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6.
NOTES
(This section contains information of a general or explanatory
nature that may be helpful, but is not mandatory.)
6.1 Intended use. The entrance assembly is used with the
AN/VVS-2(V) for driver's viewing during periods of darkness.
6.2 Acquisition requirements. Acquisition documents must
specify the following:
a. Title, number and date of this specification.
b. Necessary actions by contractor in the event of a lot
failure.
c. Quantity and schedule for First Article testing for all
line items and disposition of FAT samples.
d. Type of entrance assembly (see 3.2).
e. Issue of DODISS to be cited in the solicitation, and if
required, the specific issue of individual documents referenced (see
2.1.1 and 2.2).
f. Statement identifying that the contractor must submit his
proposal for conformance inspection to include specific requirements
to be verified and the sampling plan to be used to provide the desired
confidence level.
g. Statement specifying that FAT testing is, or is not,
required.
h. Packaging requirements.
i. Statement specifying that Coated Optical Component
coating is, or is not, required.
6.3
Definitions.
See 3.10.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business