INCH-POUND
MIL-PRF-49151D(CR)
4 March 1999
SUPERSEDING
MIL-P-49151C(CR)
26 May 1992
PERFORMANCE SPECIFICATION
POWER ADAPTER ASSEMBLY
VIEWER, DRIVER'S NIGHT VISION, AN/VVS-2(V)
This specification is approved for use by US Army Communications-Electronics
Command, Department of the Army, and is available for use by all Departments
and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers the Power Adapter Assembly which
is part of Viewer, Driver's Night Vision, AN/VVS-2(V).
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
section 3 and 4 of this specification. This section does not include
documents in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
insure completeness of this list, document users are cautioned that they must
meet all specified requirements in sections 3 and 4 of this specification,
whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving the document should be
addressed to: HQ, USA Communications-Electronics Command, ATTN: AMSEL-LC-
LEO-E-EP Fort Monmouth, NJ 07703-5023 by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or
by letter.
AMSC N/A
FSC 5855
DISTRIBUTION STATEMENT A:
Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business