MIL-PRF-49166-3 Mechanical Scanner, Mx-9872\(V\)3/Ua

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-PRF-49166/3A(CR)

4.6 Environmental tests. See MIL-PRF-49166 . Failure to meet the requirements for

Vibration as specified by para. 3.6.1 and Figure 2 of this specification, and MIL-PRF-49166B(CR),

shall constitute failure of this test..

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in

the contract or order (see 6.2). When actual packaging of material is to be performed by DoD

personnel, these personnel need to contact the responsible packaging activity to ascertain requisite

packaging requirements. Packaging requirements are maintained by the Inventory Control Point's

packaging activity within the Military Department of Defense Agency, or within the Military

Department's system Command. Packaging data retrieval is available from the managing Military

Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting

the responsible packaging activity.

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is

not mandatory.)

6.1 Intended use. The MX-9872(V)3/UA is intended for use with the AN/VSG-2, Tank

Mounted Thermal Sight.

6.2 Acquisition requirements. Acquisition documents should specify the following:

a. Title, number, and date of this specification.

b. Refer to the General specification (MIL-PRF-49166) for other acquisition requirements

data.

6.3 Definitions. (See MIL-PRF-49166)

6.4 Subject term (key word) listing.

Phase-shift lens

Counterweight

Scan-Interlace

6.5 Changes form previous issue. Marginal notations are not used in this revision to identify

changes with respect to the previous issue due to the extent of the changes.

CUSTODIAN:

PREPARING ACTIVITY:

Army-CR

(Project 5855-0223)