METRIC
MIL-PRF-49173B(CR)
19 MAY 1997
SUPERSEDING
MIL-I-49173A(ER)
11 JUNE 1982
PERFORMANCE SPECIFICATION
OPTICAL IMAGER, SU-103/UA and SU-103A/UA
This performance specification is approved for use by USACECOM, Department of the
Army, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This performance specification covers one type of common module, Optical
Imager SU-103/UA and SU-103A/UA.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the issue of the Department of Defense
Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation
(see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be
of use in improving this document should be addressed to: HQ, USA Communications-Electronics
Command, ATTN: AMSEL-LC-LEO-E-EP, Fort Monmouth, NJ, 07703-5023, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 5855
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business