MIL-PRF-49368C (CR)
2.1.2 Reference documents, drawings and publications. The following
other Government documents, drawings and publications form a part of this
document to the extent specified herein. Unless otherwise specified, the
issues are those cited in the solicitation (see 6.2.d).
DRAWINGS
USA COMMUNICATIONS-ELECTRONICS COMMAND
SM-D-850400
-
Lens Assembly, Eyepiece, AN/PVS-4 and AN/TVS-5
(Copies of specifications, standards, drawings, and publications
required by contractors in connection with specific procurement functions
should be obtained from the procuring activity or as directed by the
contracting officer.)
2.2 Order of precedence. In the event of a conflict between the text
of this document and the references cited herein, the text of this document
takes precedence. Nothing in this document, however, supersedes applicable
laws and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Description. The Lens Assembly, Eyepiece, herein referred to as
the eyepiece assembly, is part of the Night Vision Sight, Individual Served
Weapon, AN/PVS-4 and Night Vision Sight, Crew Served Weapon, AN/TVS-5.
3.2.1 First Article Testing (FAT). When specified in the contract or
purchase order (see 6.2.f), the contractor shall furnish FAT eyepiece
assemblies for inspection and approval (see 4.2).
3.3 Construction. The eyepiece assembly shall be constructed to assure
compliance with the contract configuration baseline and in accordance with
SM-D-850400 as applicable.
3.4 Material. The contractor shall select parts and materials that are
fully capable of meeting all of the operational and environmental requirements
specified herein. The materials specified in the applicable drawings are
recommended, but not mandatory. Selection criteria of the class, grade or
type part shall ensure the material will be able to perform its intended
function when it is assembled. Verification of the supplier meeting the
overall performance requirements shall be the governing acceptance standard.
Recovered materials shall be used to the maximum extent possible.
3.5 Components. The eyepiece assembly shall consist of optical
components assembled within a housing as specified on the drawings.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business