INCH-POUND
MIL-PRF-49166C(CR)
5 May 1999
SUPERSEDING
MIL-S-49166B(CR)
27 August 1997
PERFORMANCE SPECIFICATION
MECHANICAL SCANNER, MX-9872(V)/UA;
GENERAL SPECIFICATION FOR
This performance specification is approved for use by USACECOM, Department of the
Army, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This performance specification covers the general attributes of the common
module, Mechanical Scanner, MX-9872(V)/UA. This specific coverage of each variation of the
MX-9872(V)/UA are contained in specification sheets attached as supplements to this
specification.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification whether they are
listed or not.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: HQ, USA Communications-
Electronics Command, ATTN: AMSEL-LC-LEO-E-EP, Fort Monmouth, NJ 07703 by using
the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of
this document or by letter.
AMSC N/A
FSC 5855
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business