MIL-PRF-49166C(CR)
otherwise specified, the issues of documents not listed in the DoDISS are the issues of the
documents cited in the solicitation (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/IPC-S-815A
- General requirements for soldering electronic
inter-connections.
(Application for copies should be addressed to The American National Standards Institute,
Inc., 1430 Broadway, N.Y., N.Y. 10018)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM E122-89
- Sample size to estimate a quantity for a lot or
process.
(Application for copies should be addressed to the American Society for Testing and
Materials, 1916 Race Street, Philadelphia, PA. 19103-1187)
AMERICAN SOCIETY FOR QUALITY CONTROL (ASQC)
ANSI/ASQC Z 1.4
-Sampling Procedures and Tables for
Inspection by Attributes.
(Applications for copies should be addressed to American Society for Quality Control,
PO Box 3005, 611 East Wisconsin Avenue, Milwaukee, Wisconsin 53202)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein ( except for related associated specifications, specification sheets, or
MS standards), the text of this document takes precedence. Nothing in this document, however,
supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification Sheet. The individual item requirements shall be as specified herein
and in accordance with the applicable specification sheet. In the event of any conflict between
the requirements of this specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.3 Materials. The contractor shall select the materials, but the materials and parts used
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business