MIL-PRF-49169B(CR)
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When actual packaging of material is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department of Defense Agency, or within the Military
Department's System Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or explanatory nature which may be helpful, but is
not mandatory.)
6.1. Intended use. The LED module is intended for use in infrared systems.
6.2. Acquisition requirements. Procurement documents should specify the following:
a.
Title, number, date of this specification, and type of LED required (see 1.1)
b.
Issue of DoDISS to be cited in the specification and if required, the specific issue
of individual documents referenced
c.
Packaging requirements (see 5.1)
(1)
Time frame for submission of first article test
reports when first article tests are required
(2)
Time frame for approval of first article test
reports when first article tests are required
d.
Requirement for contractor-prepared, acceptance test procedure.
6.3 Existing suppliers. Suppliers who are currently supplying equipment to this specification with
a minimum average monthly rate of 10 units per month over the most current 12 month period. If
a supplier cannot maintain the minimum monthly average, a first article test (less reliability)
performed annually may sustain the existing supplier's status when performed on 3 units
manufactured by the supplier explicitly for this test. Upon implementation of this specification,
suppliers who are then supplying equipment to specification MIL-PRF-49169B (CR), Light-
Emitting Diode Array, with minimum monthly delivery rates specified above, may considered as
existing suppliers.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business