UA which is one type of common module \(see 6.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

MIL-PRF-49167B(CR)

DRAWINGS

DL-SM-B-773228

Auxiliary Control, Video PL-1402/UA

2.3 Non-Government publications. The following document(s) form a part of this

document to the extent specified herein. Unless otherwise specified, the issues of the documents

which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation.

Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the

documents cited in the solicitation (see 6.2).

AMERICAN SOCIETY OF TESTING AND MATERIAL (ASTM)

ASTM B194-92A

Copper-Beryllium Alloy Plate, Sheet,

Strip, and Rolled Bar

(Application for copies should be addressed to the American Society for Testing and

Materials, 1916 Race Street, Philadelphia, PA 11103-1187).

2.4 Order of Precedence. In the event of a conflict between the text of this document and

the references cited herein, the text of this document takes precedence. Nothing in this

specification, however, supersedes applicable laws and regulations unless a specific exemption has

been obtained.

3. REQUIREMENTS

3.1 First article. When specified (see 6.2), a sample shall be subjected to first article

inspection (see 4.2).

3.2 Materials. The contractor shall select the materials, but the materials shall be capable

of meeting all the operational and environmental requirements specified herein. The parts and

materials specified in MIL-P-11268, MIL-P-55110, MIL-C-55302, MIL-STD-2073, and ASTM

B194-92A are recommended, but are not mandatory. Recovered materials shall be used to the

maximum extent possible.

3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,

or environmentally preferable materials should be used to the maximum extent possible provided

that the material meets or exceeds the operational and maintenance requirements and promotes

economically advantageous life cycle costs.

3.3 Design. Internal design of the auxiliary control module is the responsibility of the

contractor. However, the auxiliary control module shall conform to the dimensional and interface

requirements of DL-SM-B-773228 and its subsidiary drawings.

3.4 Weight. The weight of the auxiliary control module shall be 0.23, (+0.03 -0.05)

pound.