Metric
MIL-PRF-49434A(CR)
27 August 1997
SUPERSEDING
MIL-L-49434(ER)
27 April 1997
PERFORMANCE SPECIFICATION
AIMING LIGHT, INFRARED, AN/PAQ-4C
This performance specification is approved for use by USA CECOM,
Department of the Army, and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This performance specification pertains to the Aiming
Light, Infrared, AN/PAQ-4C.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents will be those listed in the issue of the Department of Defense Index
of Specifications and Standards (DODISS), and supplements thereto, cited in
the solicitation (see 6.2.n).
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
HQ, USA Communications-Electronics Command, ATTN: AMSEL-LC-LEO-E-EP, Fort
Monmouth, NJ 07703 by using the Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5855
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business